Buy White Disposable Coveralls - 55 GSM
Interfaces on the suit, including the zipper, cuffs and the edge of the head or collar, are made liquid-tight to prevent leakage.
Special features: The most difficult part is sewing the overalls. Seamed or sealed by putting tape on them for protection purposes. The back waist elastic waist fits the body shape. Elastic in the hat fits the face for full protection. Elastic in coughs stretches, not tight, not loose. Needle work is well proportioned and stitched neatly.
-Paint spray and printing
-Nontoxic liquid handling
-Food processing and services
-Cleaning and Janitorial
Features and Benefits
>Its elasticated cuffs ensure that you are fully protected from splashes and spills.
> Latex-free elastic wrists and ankles keep dirt and debris out.
>High structural strength
>Lightweight & durable
>colured neck for added comfort
>Suitable for a wide range of applications, including within very clean rooms.
>Biological protection tested
>It also provides protection when an outbreak occurs
>It is used in a non-hazardous environment for working.
.This product protects the head, arms, and legs from certain chemicals.
.Ensure that a visual inspection has been conducted- Including checks for holes, tears, defective zippers and material faults.
.This overall is only for single use ( do not launder for reuse ).
.To cover your whole body, it is necessary to wear gloves, boots and face protection with this coverall and protect yourself completely.
Product Composition :
This product is made with polypropylene non-woven material, Which is very lightweight and durable. And its three layers provided:-
2-Anti fine particles
Protective against biological hazards
Electrostatic dissipative protective clothing
Protection against pesticides
Protection against limited fire spread.
Easy to use:
The zipper front makes the overall easy to wear and take off.
Instruction for usage:
- From the bottom up.
- Pull the cuffs up.
- Arrange the cuff position.
- Pull the zipper up to the top and adjust the cap's seal.
Method for removing the isolation
1-Unzip the zipper
2-Pull the hat up and back so that the head is off the hat and then the sleeves are off.
3-From the top down, take off and roll it.
4-The contamination is taken off the inside and put into the waste bag.
Disposable coveralls provide cost-efficient and reduce the risk of contamination. Discard them into a close bin and don't try to use them again.
Keep away from fire and inflammables. Store in dry condition without gases. This product should be protected from moisture and sealed during transportation.